Category: art

  • 28FebAccessories for lonely men

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!


    My friends Burak, Yasmine, and Jonah mentioned an exhibition at the Moma that I checked online. I now plan a trip to New York to attend it. Among the many stimulating pieces, I selected this very funny set of electronic objects in the vein of Design Noir, which I believe could sadly become a commercial hit! Accessories for lonely men are eight electronic devices designed to alleviate loneliness by stimulating the -sometimes annoying- traces that one’s companion would normally leave behind.

    The collection includes a Sheet Thief, which “winds the bedclothes up on the other side of the bed while you’re sleeping”. Other joys of sharing a bed are re-created with Cold feet and a Heavy Breather that breathes hot air down the user’s neck. In the morning the Hair Alarm Clock swings hair across the user’s face to wake him, while the steel finger of the Chest-Hair Curler gently swirls his chest hair in concentric circles.


    Accessories for lonely men by Noam Toran, photos Frank Thurston

    Jonah’s piece the WIFI-HOG is included in the show. The Wifi Hog is a tactical tool to liberate public WiFi Nodes!

    “Wi-Fi Hog is personal system for a laptop or portable computer that enables people to gain complete control over a public access wireless network. The idea is presented as an alternative to the utopian vision of wireless networks being open, shared, and utilitarian for everyone. This project is a cautionary one, and comes as a reaction to the battle over free wireless spectrum where corporate pay-per-use and free community networks are fighting for signal dominance in public spaces. Wifi-Hog exists as a tactical media tool for controlling and subverting this claim of ownership and regulation over free spectrum, by allowing a means of control to come from a third-party.”

    Design and the Elastic Mind exhibition opens February 24th, 2008 at New Yorks Museum of Modern Art (MoMA).

    Posted by Cati Vaucelle @ Architectradure
    …………………………………………………………………………………


  • 01MarLe Décalé

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    I love Sala’s design objects. From interior to furniture design, every piece will make you smile!

    Posted by Cati Vaucelle @ Architectradure
    …………………………………………………………………………………


  • 08MarColoring book









    I love this coloring book and sticker kit idea by Sanithna Phansavanh.

    Posted by Cati Vaucelle @ Architectradure

    …………………………………………………………………………………

    Blog Jouons Blog Maison Blog Lesson


  • 10MarTransgenesis

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!


    Transgenesis

    In 2000 I had the chance to meet Pavel Smetana at Avignon Numrique, in France, and interact with his Room of Desires that he created in 1995. In this project I was connected to brainwave and heart-rate sensors in an empty room, with video projections of pretty relaxing pictures and music. As soon as I would become excited with an image, the system would generate new images and sounds, based on my biofeedback. The audience could witness these changes and understand what imagery would trigger a certain kind of emotions. After a while I would be able to control the system, in a way “controlling my emotions” and also what the audience would see as a result.

    Recently Pavel Smetana in collaboration with Ivor Diosi and Ivan Acher revisited this past work and created transgenesis, a set of virtual environments the audio and the visual parts of which are changing in real-time in dependence on data received form sensors capturing brain and heart activity of viewers. Each viewer enters those and only those virtual landscapes which his or her physical and mental states lead to. Landscapes vary in audiovisual styles ranging from horror-like hyper-realistic atmosphere up to geometric or organic abstractions.

    Posted by Cati Vaucelle @ Architectradure
    …………………………………………………………………………………
    Blog Jouons Blog Maison Blog Lesson

  • 11MarDIY: A latte art printing machine!

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    I posted on bread laser printing, fruit printing, computer etching, 3d printing your own guitar, printing your clothing (a next step for TUI), and also about the secret-spying marks left by your printer as you print!

    Today, I found this wacky and so cooool tutorial on how to make your own latte art printing machine. Oleskiy Pikalo wanted art work on his latte, so he bought a x-y flatbed plotter (Philips 8155) on eBay and a great book by Matt Gilliland: “Inkjet Applications”!

    Here is the result, see the video!

    He offers a tutorial on how to build something like this, here you go, so you need (I quote him):

    1) An old flatbed plotter (in my case it was Philips 8155) – make sure it has real x-y translation stage. Your best bet is to perform a search on eBay for flatbed plotter. On a good day, you may get a decent fully working plotter for under 100$. I got mine for 175$ with shipping, because I wanted A3 format for later use, and a bunch of pens.

    2) Most old plotters connect through GPIB/Serial interface -mine connected through GPIB interface, so I needed a GPIB card, which I also got on eBay. I got my card for around 30$, because the one I purchased was not a popular kind (LTP1 – GPIB).

    3) Matt Gilliland’s book Inkjet Applications. It looks like Parallax has this fabulous kit on 40% sale for 59.95$

    4) A small 12V relay (my plotter lowers pen by applying 12V to the solenoid). This relay will enable the stream of ink from the inkjet cartridge.

    5 ) Edible ink – preferably brown. You can work with coffee directly instead of ink, but the contrast is not as good as wwith ink. Again, I got mine on eBay.

    Good luck!

    Posted by Cati Vaucelle @ Architectradure
    …………………………………………………………………………………
    Blog Jouons Blog Maison Blog Lesson

  • 11MarDIY: A latte art printing machine!

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    I posted on bread laser printing, fruit printing, computer etching, 3d printing your own guitar, printing your clothing (a next step for TUI), and also about the secret-spying marks left by your printer as you print!

    Today, I found this wacky and so cooool tutorial on how to make your own latte art printing machine. Oleskiy Pikalo wanted art work on his latte, so he bought a x-y flatbed plotter (Philips 8155) on eBay and a great book by Matt Gilliland: “Inkjet Applications”!

    Here is the result, see the video!

    He offers a tutorial on how to build something like this, here you go, so you need (I quote him):

    1) An old flatbed plotter (in my case it was Philips 8155) – make sure it has real x-y translation stage. Your best bet is to perform a search on eBay for flatbed plotter. On a good day, you may get a decent fully working plotter for under 100$. I got mine for 175$ with shipping, because I wanted A3 format for later use, and a bunch of pens.

    2) Most old plotters connect through GPIB/Serial interface -mine connected through GPIB interface, so I needed a GPIB card, which I also got on eBay. I got my card for around 30$, because the one I purchased was not a popular kind (LTP1 – GPIB).

    3) Matt Gilliland’s book Inkjet Applications. It looks like Parallax has this fabulous kit on 40% sale for 59.95$

    4) A small 12V relay (my plotter lowers pen by applying 12V to the solenoid). This relay will enable the stream of ink from the inkjet cartridge.

    5 ) Edible ink – preferably brown. You can work with coffee directly instead of ink, but the contrast is not as good as wwith ink. Again, I got mine on eBay.

    Good luck!



    Posted by Cati Vaucelle @ Architectradure

    …………………………………………………………………………………

    Blog Jouons Blog Maison Blog Lesson


  • 12MarTableCloth

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    Table Cloth designed by Maija Louekari.

    Posted by Cati Vaucelle @ Architectradure

    …………………………………………………………………………………

    Blog Jouons Blog Maison Blog Lesson


  • 12MarTableCloth

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    Table Cloth designed by Maija Louekari.

    Posted by Cati Vaucelle @ Architectradure

    …………………………………………………………………………………

    Blog Jouons Blog Maison Blog Lesson


  • 18MarBicycles can create smoke too!



    Keep on Smoking by Michel de Broin

    As an alternative to petrol, this custom-made bicycle transforms kinetic energy produced by the cyclist into smoke. The will to power is a renewable energy resource that can be recuperated by a power generator supplying enough electricity to operate a smoke machine. The work is the result of two coupled machines; the one human is productive and the other machine, consumptive. This coupling of machines produces smoke, a waste energy that is liberated freely in the atmosphere.

    Video.

    Posted by Cati Vaucelle @ Architectradure

    …………………………………………………………………………………

    Blog Jouons Blog Maison Blog Lesson


  • 20MarVirus love

    If you’re new here, you may want to subscribe to my RSS feed to receive the latest Architectradure’s articles in your reader or via email. Thanks for visiting!

    Yazna and ++, created by Luca Bertini, are two computer virus in love, roaming from one computer to another computer to find each others. Their passage do not damage computers. Their passage is soft, invisible and extremely fragile. They live a few moments in your more instable computer folders, they leave a small sign of their presence and if they don’t find each other, they go back. In the event of an actual meeting, maybe their will give birth to a wanderful color dot baby. Feel free to look at their posology.

    Yazna and ++

    Working on data narratives, Luca Bertini created Nacre, a synthesized creature stubbornly trying to protect itself from unmanageable amounts of data. Interferences and anomalies retrieved from the net are perceived as a hostile external body and thus analyzed and converted into a shield through a frantic, abnormal growth.

    Posted by Cati Vaucelle @ Architectradure
    …………………………………………………………………………………
    Blog Jouons Blog Maison Blog Lesson